How to Operate RA-710?

Following simple steps below to measure roast level with RoastRite Coffee Roast Analyzer.


Overview & Setup

A. Accessories

Coffee Roast Analyzer RA-710 Accessories

Coffee Roast Analyzer RA-710 Accessories

B. Hardware Overview

Overview of RoastRite Coffee Roast Analyzer.

Coffee Roast  Analyzer RA-710

C. Preparation

Watch the video or follow the steps below to set up the analyzer.

Twist the upper part 90° to detach it from the bottom. Open the battery compartment, insert 2 AA batteries and flip the power switch to ON.

Coffee Roast Analyzer RA-710 battery installation

Page top


Measure Ground Coffee

Please refer to the instruction video for tips, or follow the step-by-step instruction below:

Twist the upper part 90° to detach it from the bottom part. Twist and turn the measurement cup to separate it from the bottom stand.

Preparation for measuring ground coffee with coffee roast analyzer

Pour ground coffee into the measurement cup to a height about 1 cm over the top. Lightly tap the measurement cup vertically to allow grounds to fill the cup. Place the Flattening Scraper horizontally by the edge of the cup, then rotate the cup about 10 times to scrape off the excess.

Filling ground coffee into the measurement cup

Place the measurement cup back on to the stand, cover with the analyzer and press the button, the reading will be displayed within seconds.

Measuring with coffee roast analyzer RA-710

Page top


Measure Coffee Beans

Please refer to the instruction video for tips, or follow the step-by-step instruction below:

Twist the upper part 90° to detach it from the bottom part. Twist and turn the measurement cup to separate it from the bottom stand. Place Bean Measurement Ring into measurement cup.

Preparation for measuring coffee beans with coffee roast analyzer

Fill coffee beans into the measurement cup to the height about 1 cm over the top. Remove exceeded beans with the Flattening Scraper, fill beans between gaps (as shown in #3), then flatten it (as shown in #4), repeat the process until the surface is as even and flat as possible.

Filling coffee beans into the measurement cup

Place the measurement cup back on to the stand, cover with the analyzer and press the button, the reading will be displayed within seconds.

Measuring with coffee roast analyzer

Page top